Fabrication of black printing toner through in situ polymerization: An effective way to increase conversion

Journal: Vol.8, No.2, 2015 - Article 2   Pages :  115 Until 121

Article Code:

Fatemeh Andami: Institute for Color Science and Technology - Department of Printing Science and Technology
M. Ataeefard: Institute for Color Science and Technology - Department of Printing Science and Technology
Farhood Najafi: Institute for Color Science and Technology - Departments of Resin and Additives
Mohammad reza Saeb: Institute for Color Science and Technology - Departments of Resin and Additives

Article's abstract:

Styrene-acrylate copolymer was synthesized in presence of carbon black through heterogeneous polymerization. The percentage of monomer conversion was measured by gravimetric method, also PSA, SEM, DSC and GPC were used for studying the particle size and particle size distribution, morphology, thermal properties and molecular weight, respectively. As well as color properties were characterized by spectrophotometry method. The results showed that the copolymer was appropriate for applying as printing toner. In this study to improve the monomer conversion, a redox initiator system was applied, so the conversion increased from 20 to 75. Other properties such as particle size, particle size distribution, morphology, thermal behavior, molecular weight and color properties were affected by this change but they were in the acceptable range.


1. M. Ataeefard, Production of carbon black acrylic composite as an electrophotographic toner using emulsion aggregation method: Investigation the effect of agitation, Compos. Part B: Eng., 64(2014), 78-83.#2. K. Helmut, Hand book of print media: technologies and production methods. Germany: Springer, 2001.#3. C .L. Lago, H. D.Torres da Silva , C. A. Neves , J. G. Alves Brito-Neto , A dry process for production of microfluidic devices based on the lamination of laserprinted polyester films, Anal. Chem. 75(2003), 3853-3858.#4. E. Piccin, D. Ferrarob, P. Sartori, E. Chiarello, M. Pierno, G. Mistura, Generation of water-in-oil and oil-in-water microdroplets in polyester-toner microfluidic devices, Sens. Actuators B, 196(2014), 525-531.#5. J. Hasegawa, N. Yanagida, and M. Tamura, Toner prepared by the direct polymerization method in comparison with the pulverization method, Colloids Surf., 153(1999),215-220.#6. R. Arshady, Suspension, Emulsion, and Dispersion Polymerization: A Methodological Survey, Colloid. Polym. Sci., 270(1992),717-372.#7. G. Galliford, The anatomy of a toner. Ventura: Galliford Consulting and Marketing, 2006.#8. S. Kiatkamjornwong and P. Pomsanam, Synthesis and characterization of styrenic-based polymerized toner and it's composite for electrophotographic printing, J. Appl. Polym. Sci., 89(2002), 238-248.#9. H. Liu, S. Wen, J. Wang, and Y. Zhu, Preparation and characterization of carbon black-polystyrene composite particles by high-speed homogenization assisted suspension polymerization, J. Appl. Polym. Sci., 123(2011), 3255-3260.#10. S. Hayashi, S. Handa, Y. Oshibe, T. Yamamoto, and N. Tsubokawa, Grafting of polymers onto carbon black surface by the trapping of polymer radicals formed by the decomposition of peroxide polymers Polymer, Polym., 27(1995), 623-630.#11. S. Hayashi and N. Tsubokawa, Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers, Macromol. Sci., Pure Appl. Chem., A35(1998), 1781-1796.#12. J. Yang, T. Wang, H. He, F. Wei, and Y. Jin, Particle size distribution and morphology of in situ suspension polymerized toner, Ind. Eng. Chem., 42 (2003), 5568-5575.#13. H. Huang, H. Zhang, J. Li, S. Cheng, F. Hu, and B. Tan, Miniemulsion copolymerization of styrene & butyl acrylate initiated by redox system at lower temperature preparation & polymerizatin of mini emulsion, J. Appl. Polym. Sci., 68(1997), 2029-2039.#14. K. Yuki, T. Sato, H. Maruyama, J. Yamauchi, and T. Okaya, The role of polyvinylalchohol in emulsion polymerization, Polym. Int., 30(1992), 513-517.#15. H. Widiyandari, F. Iskandar, and N. Hagura, Preparation and characterization of nanopigment-poly(styrene-co-n-butyl-acrylate-co-methacrylic acid) composite particles by high speed homogenization assisted suspension polymerization, Appl. Polym. Sci., 108(2008), 1288-1297.#16. M. R. Casado, P. A. Lovell, P. Navabpour, and J. L. Stanford, Polymer encapsulation of surface-modified carbon blacks using surfactant-free emulsion polymerization, Polym., 48(2007), 2554-2563.#17. T. Ozturk and I. Cakmak, Synthesis of block copolymers via redox polymerization process: a critical review, Iran. Polym. J., 16(2007), 561-581.#18. M. Koyama, K. Hayashi, T. Kikuchi, and K. Tsujita, Synthesis and Characteristics of Non-Spherical Toner by Polymerization Method, presented at the International Congress on Advances in Non-Impact Printing Technologies, Louisiana, 1994.#19. C. S. Chern, Emulsion polymerization mechanism and kinetics, Prog. Polym. Sci., 31(2006), 443-486 .#20. C. S. Chern, Principle and applications of emulsion polymerization. New Jersey: John Willey & Sons, 2008.

Article's file
Page view: 3980
Article's download quantity : 39

Article System Login

Prof. Zahra Ranjbar
Dr. Farahnaz Nourmohammadian
Assistant Editor:
Dr. Mozhgan Hosseinnezhad
ISSN (online):
Institute for Color Science and Technology (ICST)

Quick Access
What is your opinion about the manuscript subscription system of PCCC website?
Website Statistics
Page view:3,981
Online Visitors:31